|
Butt
Putty®
Crack Filler Gel |
|
F9208 |
|
Butt Putty®
Crack Filler Gel is a two component Epoxy
with a gel consistency. It is used to fill, bond and
reinforce cracks and voids in concrete structures, masonry
and wood. Butt Putty® Crack
Filler Gel can be used to bond metals and
plastics when surfaces have been abraded. |
|
Butt Putty®
Crack Filler Gel gets very hard when cured,
yet still has good impact resistance and no shrinkage. The
product also has good water, chemical and heat resistance. |
|
|
|
MIXING AND APPLICATION |
Mix equal amounts of Parts A and B (use a spoon or spatula)
and place side by side on flat metal or plastic surface.
Clean each utensil after first use to avoid contaminating
the other part. Use spatula to mix the two portions
repeatedly until the color is uniform.
Fill the crack by pushing the
Butt Putty® Crack Filler Gel into it from
each side. When near the surface place a piece of polyester
fabric (cut to fit) into the crack and topcoat until smooth
and even with the surface.
Working time of mixed Gel is 45 minutes
Cure takes approximately 12 hours depending on temperature. |
|
Butt Putty
MSDS
Masonry
Repairs
Crack Repair
Purchase
|
|
|
