Lantz Structures
Lancaster, PA
March 2007
New 48,000 sq. ft. building with
in-floor radiant heat.
ProFloor Clear Epoxy and
ProPoly Clear Urethane
topcoat applied to facilitate
floor cleaning.

                                                    Floor Prep

Removed
Acrylic Concrete Sealer From Surface using Rotary Scraper and Sanding Disc

                                Application

                                                  Steve Malone
     from Signature Maintenance is

applying
ProFloor™

Clear Epoxy

     with a Topcoat of
      Liquid ProPoly®
          
         Clear Urethane

               ProFloor™ Epoxy is applied at a rate of 415 sq.ft. / gal. (3.85 mil DFT)

               Liquid ProPoly® Clear Urethane applied at a rate of 413 sq. ft. / gal. (2.7 mil DFT)

                             Working in Sections

Cured
Sections

Finished Floor Back in Service

The information presented herein is furnished free of charge and is based on technical data that Pro Guard believes to be reliable. It is intended for use by persons having technical skill and is at their own discretion and risk. Since conditions of use are outside our control we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate or a recommendation to infringe any patents.

 One Industrial Way    P.O. Box 289    Denver, PA 17517
P (717) 336-7900  F(717) 336-7320  Toll Free (1-800) 735-4399
Web site:  www.proguardcoatings.com      E-mail:  info@proguardcoatings.com