|
Proflex Flexible Epoxy® |
 |
|
EZ Application 1500 Series |
|
Features and Uses |
|
|
|
Proflex
Flexible Epoxy®
is a 2-component low viscosity liquid epoxy that is
very flexible when cured. |
|
|
|
These features make it ideal for use as a: |
- Pourable crack filler for concrete, wood, plastics
as well as foams.
- Filler and resurfacer (with sand and aggregate) to
repair concrete decks, walks and steps.
- Self-leveling sealer for drip pans, impoundments and
flexible membranes.
- Tough yet flexible skin-former for fragile materials
such as foams, fabrics, etc.
|
Proflex Flexible Epoxy®
can be used by itself or mixed with (dry) sand and or larger
aggregate. The addition of a filler material will reduce
cost and add strength. Use approximately 3 - 4 volume of
aggregate to 1 volume of Proflex
Flexible Epoxy®. Adjust this volume as
required in the field.
|
Proflex Flexible Epoxy®
is 100% solids so it does not shrink in curing. The product
is water, salt and chemically resistant, allowing for a wide
spectrum of applications.
|
|
Application Guidelines |
|
Proflex Flexible Epoxy®
has a thin consistency so it will self-level. When ready to
apply, mix part A and part B, as instructed on the label.
Mix thoroughly. |
|
|
|
When parts A and B are mixed,
Proflex Flexible Epoxy® will have a pot life
of approximately 45 – 60 minutes in ambient temperatures of
70 - 75 deg F. The pot life will decrease with increasing
temperatures. Full cure is achieved in approximately 24
hours after application. |
|
|
|
|
Pro Guard Epoxy™ 2228
