The Liquid ProPoly® Series of products are all high solids 2 part Aliphatic Urethanes. They differ only in color and anti-skid additives.

Quick Links:  
Click Below for quick access to the information you need.

   Features    Surface Prep & Installation     Coverage     Product Data      

Color Chart

As with all Color Charts posted on the Internet; we cannot guarantee the accuracy of the colors you are viewing based on differences in Monitors, Browsers, etc.

Custom colors are available at an additional cost of $3.00 and up per gallon depending on the color with a minimum order of 50 gallons.  As with all custom orders, additional time may be required to produce your order.  Please submit a color chip to us for accurate color matching for all custom colors.  Please contact us by phone if you need guidance placing a custom order at (800) 735-4399.

Liquid ProPoly Features:

                 TWO DIFFERENT PRIMERS TO CHOOSE FROM                    
(depending on substrate used and finish desired)

Traffic Decks should have non-skid surfaces.  This is easily accomplished by incorporating the Anti-Skid Additive to any Liquid ProPoly® product.

Liquid ProPoly® coatings can be applied to both rigid as well as flexible substrates.  It will have excellent adhesion to certain substrates when used alone and require a primer for others.  The following is a guide:

1. Substrate to be coated must be dry and free of dirt, debris and loose or peeling paint, asphalt based coatings must be removed. 
2. Make any necessary repairs to ensure a structurally sound substrate prior to coating.
3. Corrosion on steel must be primed prior to application of Liquid ProPoly®
4. Repair masonry with epoxy compounds such as ProFill®, Butt Putty® Crack Filler Gel or one of three Proflex products we manufacture:  Proflex Flexible Epoxy®, Proflex Primer® F1501 White or Proflex Primer® F1500 Clear

• More time to distribute the material when the mixed product is discharged from the container onto substrate within 45 minutes. 
• Addition of solvent extends pot life.
• When spraying always put pump suction tube into newly mixed pail and then add remainder of previous pail. 
• Flush spray pump and hoses with MEK (Methyl Ethyl Ketone) solvent every two hours to prevent product from curing in the hose when spray application takes more than two hours to complete.
• Do not apply Liquid ProPoly® if rain is forecast within 12 hours.

Product Data:

The information presented herein is furnished free of charge and is based on technical data that Pro Guard believes to be reliable. It is intended for use by persons having technical skill and is at their own discretion and risk. Since conditions of use are outside our control we make no warranties, express or implied, and assume no liability in connection with any use of this information. Nothing herein is to be taken as a license to operate or a recommendation to infringe any patents.