|
EPDM
Liquid Rubber®
F9981 White, F9999 Black, F9988 Gray
Liquid EPDM Rubber Coating
Liquid Rubber is the worlds only EPDM
rubber in liquid form. Liquid Rubber
provides a seamless, single coat, roof coating that can be
applied up to 6 times thicker than your standard
elastomeric. Liquid rubber is ideal for recoating EPDM roof
membranes, troweled concrete, weathered metal roofing, foam,
weathered siding and more! Liquid Rubber will withstand
ponding water or immersion indefinitely and Liquid
Rubber can be installed over lightly rusted surfaces without
a primer. Uncured Liquid Rubber will not be damaged by
freezing temperatures.
EPDM Liquid Rubber®
EPDM Rubber has been used in sheet form
in commercial applications for over 30 years. EPDM Rubber
Provides an affordable, flexible, chemical and ozone
resistant way to recoat your existing roof. Liquid rubber
can also be used to line your gutters and cooler units.
Liquid Rubber performs in temperature -60° to 300°F. Coverage:
EPDM Liquid Rubber® will cover up to 46 square feet per gallon on
a very smooth surface. Normal coverage is 40-42 square
feet per gallon on an average substrate. The
required 20 mil film thickness will be achieved when the
above spreading rate is used. If you are
uncertain how to calculate the amount of material you will
need, please contact Pro Guard Coatings at (800-735-4399)
M-F 8-4:30 EST.
Click here to
Order EPDM Liquid Rubber.
The
information presented herein is furnished free of charge and
is based on technical data that Pro Guard believes to be
reliable. It is intended for use by persons having technical
skill and is at their own discretion and risk. Since
conditions of use are outside our control we make no
warranties, express or implied, and assume no liability in
connection with any use of this information. Nothing herein
is to be taken as a license to operate or a recommendation
to infringe any patents.
|
